dmesg - Intel Core i5-4570
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-23-generic (buildd@phianna) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #31-Ubuntu SMP Tue Oct 21 17:56:17 UTC 2014 (Ubuntu 3.16.0-23.31-generic 3.16.4)
Command line: BOOT_IMAGE=/vmlinuz-3.16.0-23-generic root=/dev/mapper/vagrant--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[mem 0x7fc00000-0x7fdfffff] page 2M
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[mem 0x7c000000-0x7fbfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x7fe00000-0x7ffeffff]
[mem 0x7fe00000-0x7ffeffff] page 4k
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
RAMDISK: [mem 0x34e34000-0x36711fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
ACPI: XSDT 0x000000007FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 0x000000007FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 0x000000007FFF0470 001BF1 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 0x000000007FFF0200 000040
ACPI: APIC 0x000000007FFF0240 000054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 0x000000007FFF02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
Initmem setup node 0 [mem 0x00000000-0x7ffeffff]
NODE_DATA [mem 0x7ffeb000-0x7ffeffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x7ffeffff]
On node 0 totalpages: 524174
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8128 pages used for memmap
DMA32 zone: 520176 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x80000000-0xfffbffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s87360 r8192 d23232 u2097152
pcpu-alloc: s87360 r8192 d23232 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515961
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-23-generic root=/dev/mapper/vagrant--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2021764K/2096696K available (7731K kernel code, 1200K rwdata, 3608K rodata, 1360K init, 1308K bss, 74932K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16640 nr_irqs:256 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 3189.861 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6379.72 BogoMIPS (lpj=12759444)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e82000 - ffffffff81e8a000)
ftrace: allocating 29288 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (fam: 06, model: 3c, stepping: 03)
Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (6379.72 BogoMIPS)
NMI watchdog: disabled (cpu0): hardware events not enabled
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 20:44:54, date: 05/16/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe07fffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:08.0: [8086:100e] type 00 class 0x020000
pci 0000:00:08.0: reg 0x10: [mem 0xf0820000-0xf083ffff]
pci 0000:00:08.0: reg 0x18: [io 0xd040-0xd047]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
ACPI: Enabled 2 GPEs in block 00 to 07
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 3 devices
ACPI: bus type PNP unregistered
Switched to clocksource acpi_pm
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25464K (ffff880034e34000 - ffff880036712000)
platform rtc_cmos: registered platform RTC device (no PNP device found)
RAPL PMU detected, hw unit 2^-0 Joules, API unit is 2^-32 Joules, 4 fixed counters 10737418240 ms ovfl timer
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 256 (order: 2, 16384 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1431809094.423:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 3998
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000400000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: d120c47c14beb62ead6703d41712cc110575d297'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 15:3:751
misc uinput: hash matches
ata_link link2: hash matches
link2: hash matches
tty ttyS2: hash matches
rtc_cmos rtc_cmos: setting system clock to 2015-05-16 20:44:54 UTC (1431809094)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata1.01: NODEV after polling detection
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 83886080 sectors, multi 128: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1360K (ffffffff81d2e000 - ffffffff81e82000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 448K (ffff880001790000 - ffff880001800000)
Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
systemd-udevd[99]: starting version 208
random: systemd-udevd urandom read with 8 bits of entropy available
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:c7:e7:dd
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
e1000 0000:00:08.0 eth1: (PCI:33MHz:32-bit) 08:00:27:68:db:63
e1000 0000:00:08.0 eth1: Intel(R) PRO/1000 Network Connection
Switched to clocksource tsc
floppy0: no floppy controllers found
work still pending
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): orphan cleanup on readonly fs
EXT4-fs (dm-0): 13 orphan inodes deleted
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (205) killed by TERM signal
Adding 786428k swap on /dev/mapper/vagrant--vg-swap_1. Priority:-1 extents:1 across:786428k FS
systemd-udevd[337]: starting version 208
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
vboxguest: module verification failed: signature and/or required key missing - tainting kernel
[drm] Initialized drm 1.1.0 20060810
parport_pc 00:02: reported by Plug and Play ACPI
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input6
vboxguest: misc device minor 57, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
vboxguest: Successfully loaded version 4.3.24 (interface 0x00010004)
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
audit: type=1400 audit(1431809099.833:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=394 comm="apparmor_parser"
audit: type=1400 audit(1431809099.833:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=394 comm="apparmor_parser"
audit: type=1400 audit(1431809099.833:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=394 comm="apparmor_parser"
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
intel_rapl: no valid rapl domains found in package 0
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ppdev: user-space parallel port driver
random: nonblocking pool is initialized
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (588) killed by TERM signal
audit: type=1400 audit(1431809102.053:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=775 comm="apparmor_parser"
audit: type=1400 audit(1431809102.053:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=775 comm="apparmor_parser"
audit: type=1400 audit(1431809102.053:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=775 comm="apparmor_parser"
audit: type=1400 audit(1431809102.057:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=775 comm="apparmor_parser"
audit: type=1400 audit(1431809102.057:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=775 comm="apparmor_parser"
init: Failed to spawn thermald main process: unable to execute: No such file or directory
audit: type=1400 audit(1431809102.357:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/mysqld" pid=1027 comm="apparmor_parser"
floppy0: no floppy controllers found
work still pending
systemd-logind[1293]: New seat seat0.
systemd-logind[1293]: Watching system buttons on /dev/input/event0 (Power Button)
systemd-logind[1293]: Watching system buttons on /dev/input/event1 (Sleep Button)
systemd-logind[1293]: Watching system buttons on /dev/input/event3 (Video Bus)
systemd-logind[1293]: Failed to start unit user@900.service: Unknown unit: user@900.service
systemd-logind[1293]: Failed to start user service: Unknown unit: user@900.service
systemd-logind[1293]: New session 1 of user vagrant.
vboxsf: Successfully loaded version 4.3.24 (interface 0x00010004)
systemd-logind[1293]: Failed to start unit user@998.service: Unknown unit: user@998.service
systemd-logind[1293]: Failed to start user service: Unknown unit: user@998.service
systemd-logind[1293]: New session c1 of user blackfire.
systemd-logind[1293]: New session c2 of user blackfire.
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
VBoxService 4.3.24 r98716 (verbosity: 0) linux.amd64 (Mar 2 2015 15:19:57) release log
00:00:00.000048 main Log opened 2015-05-16T20:45:10.612786000Z
00:00:00.000147 main OS Product: Linux
00:00:00.000171 main OS Release: 3.16.0-23-generic
00:00:00.000190 main OS Version: #31-Ubuntu SMP Tue Oct 21 17:56:17 UTC 2014
00:00:00.000207 main OS Service Pack: #31-Ubuntu SMP Tue Oct 21 17:56:17 UTC 2014
00:00:00.000226 main Executable: /opt/VBoxGuestAdditions-4.3.24/sbin/VBoxService
00:00:00.000229 main Process ID: 1791
00:00:00.000229 main Package type: LINUX_64BITS_GENERIC
00:00:00.000993 main 4.3.24 r98716 started. Verbose level = 0
systemd-logind[1293]: New session 2 of user vagrant.
systemd-logind[1293]: New session 131 of user vagrant.